Strength and precision in a single solution.
Combining the two systems, cutting with high-pressure water and cutting with a disc, is an excellent combination that fully satisfies quality, production costs and short work times.
WaterTerch Technology – Water jet cutting. 3 and 5 axes.
The use of technological materials entails the need to use cutting systems with high pressure water, in order to ensure high quality cutting, with production costs significantly higher than cutting on disk. Considering that the disc manufacturers are increasingly developing products capable of cutting technological materials with an excellent degree of quality; considering that cutting with a disc is always faster than water and has a lower cost. The combination of the two systems, cutting with high pressure water and cutting with disc, is an excellent combination that fully satisfies quality, production costs and low working times.
The Water Jet is the cold cutting solution, suitable for pieces shaped with more or less complex geometries up to thicknesses
quite significant. A water jet can be used pure or mixed with abrasive. The cutting unit is mounted on edge of the axis slide (Z) and is composed of a cutting kit which provides for the mixing of water and abrasive. The heads for cutting water jet used by OMAG guarantee the maximum efficiency and minimal maintenance.
CHARACTERISTICS
- Support surface 4.500×2.400 mm
- Dimensions of cutting table with disk and water cutting head 3.800×2.250 mm
- Table inclination with maximum tilting capacity 85 ° -1.200 Kg
- Minimum and maximum diameter of discs that can be mounted 300-400 ø mm
- Maximum cutting thickness with disc diameter ø 300 71 mm
- Rotation and disc motor power 7,5 Kw
- Â
Technical Details
| Description | Data |
|---|---|
| Controlled motion axes | 5 axes |
| Workbench surface | 4.500x2.400 mm • 177x94 inches |
| Cutting plane dimensions with disk and water cutting head | 3.800x2.250 mm • 149x88 inches |
| Tilting table function - maximum weight | 85°-1.200 kg |
| Maximum static load applicable on to the table | 2.000 kg |
| Cutting disc diameter Ø min and Ø max | 300-400 ø mm • 11,8-15,7 ø inches |
| Maximum cutting thickness with Ø 300 mm diameter disk (flange 158 mm, 6,22 inches) | 71 mm • 2,8 inches |
| Disc motor power and rotation | 7,5 KW • 3000 rpm |
| Axis X - Transverse axis stroke maximum feed rate | 4.100 mm • 161 inches 48 mt /Min • 10 / -3.650 |
| Axis Y - Bridge axis stroke maximum feed rate | 3.050 mm • 120 inches 42 mt /Min • 10 / -2.650 |
| Axis Z - Vertical axis stroke maximum feed rate | 400 mm • 15 inches 15 mt /Min • 10 / -250 |
| Axis C - Rotation in axis of the disk | 4.500 °/Min • ± 200° |
| Axis A - Water head inclination | 4.000 °/Min • ± 70° |
| Pump power, high pressure water | 40 HP • 500 ÷ 3.800 bar (on demand) |
| Maximum flow rate at maximum pressure | 2,7 lt /Min |
| KMT Cutting Head | IDE II |
| Maximum capacity of external sand tank | 215 l |
| Distance from the base of the cutting disc to the support surface | 150 mm • 5,9 inches |
| Maximum distance from the cutting head with water to the support surface | 94 mm • 3,7 inches |
| Water consumption | 40 l/min |
| Approximate weight | 14.000 kg |
| Overall dimensions | 6.300 x 6.500 mm |